1.本機齒輪厚度50mm 采用40鉻鋼鍛打件調質處理，齒輪加工完成后在經高頻淬火處理硬度可達45-48HRC。整機配有真空吸附輔助前緣送紙系統，送紙方式具有一次性完成瓦楞紙板的印刷、開槽、模切等功能。電腦操控部采用多組通訊式電腦調整，主機電腦采用大屏PLC統一控制系統，可單獨控制送紙部、印刷部、開槽部、模切部，印刷版輥安裝有掛板歸零裝置，并配有反正腳踏開關。

2.開槽部預壓雙壓線輪，該機開槽深度和360°相位為電腦電動，開槽刀盤和壓線輪預壓輪左右移動均為絲桿電動點動調整，并附有尺標讀數。開槽相位調整機構為行星齒輪結構，整機傳動軸接紙軸距蕞190mm可實現蕞小200mm紙板通過。

3.雙層罩殼，5刀盤，電動調整長寬高

I.  Overview of overall structure:

1. The gear thickness of this machine is 50mm, which is quenched and tempered by 40 chrome steel forging pieces. After the gear is processed, the hardness can reach 45-48HRC after high-frequency quenching. The whole machine is equipped with vacuum adsorption auxiliary leading edge paper feeding system, and the paper feeding mode has the functions of one-time printing, slotting. of corrugated board. The computer control section is adjusted by multiple groups of communication computers. The host computer adopts a large screen PLC unified control system, which can control the paper feeding section, printing section, slotting section separately. The printing plate roller is equipped with a hanging plate zeroing device, and is equipped with a reverse pedal switch.

2. Double pre-pressing wheel at the slotting part. The slotting depth and 360 ° phase of the machine are computer driven. The left and right movements of the slotting cutter head and the pressing wheel pre-press wheel are adjusted by the electric inching of the screw rod, with ruler readings attached. The slotting phase adjustment mechanism is a planetary gear structure, and the minimum 200mm paperboard can pass through the transmission shaft of the whole machine with a paper receiving wheelbase of up to 190mm.

3.Double cover, 5 slotting plates, electric adjust slotting knives. 

技術參數 Technical parameter