結構和功能特點

1.前緣部三排軸送紙，電動調整側擋氣動拍齊，進紙軸采用橡膠軸加壓花輥結合四軸送紙方式，送紙軸壓力調節采用偏心輪調整、左右偏心輪同步調整壓力高低。

2.送紙前緣部采用雙側檔板加后擋板穩固紙板方式，以避免在前緣送紙過程中把上一張紙板帶離錯位，造成開槽誤差，能更好地適應各種質量的紙板，而且送紙穩定準確。

3. 開槽刀盤采用全球墨件加工而成，開槽刀采用鋸齒弧形半圓刀開槽去屑，開槽完畢紙板進入分紙軸，分紙刀將紙箱兩個邊分切整齊。

4. 紙板開槽、切角、 壓線、分邊完成后由設備出紙部傳送軸導出，本機壓線部配有予壓軸予壓輪，主壓軸主壓輪，預防壓線爆紙。

5. 本機采用電動行星齒輪相位調整來調整紙板尺寸，可不停機直接調整。

Main structure and features

1. Feeding paper roller adopt rubber roller and patterned roller connected with four rollers feeding type, feeding paper roller pressure adjustment adopt eccentric wheel adjust and left-right eccentric wheel, adjust the pressure synchronous

2. Pushing paperboard department adopt both sides baffle and latter baffle to fasten paperboard, to avoid the slotting error when pushing paperboard which make upper paperboard misplace, can fit to every kinds paperboard, and sending paper stable and accurate.

3. Slotting plate adopt full steel processed accessories, slotting knives adopt zigzag arc-shaped semicircle knives to slot and remove the scrap, paperboard get into slitting roller after slotting, slitting knives slit both sides of the paperboard(note:pressing wheel and slitting knives in one roller)

4. Paperboard is send out by transport roller after slotting, corner-cutting, slitting, pressing, this machine scorer part have pre-press shaft and pre-press wheel, main press shaft and main press wheel avoid scoring paper broken.

5.  This machine adopt electric planetary gear phase to adjust paperboard size, can adjust without stopping.

技術參數 Technical parameter