1.本機齒輪厚度50mm 采用40鉻鋼鍛打件調質處理，齒輪加工完成后在經高頻淬火處理硬度可達45-48HRC。整機配有真空吸附輔助前緣送紙系統，送紙方式具有一次性完成瓦楞紙板的印刷、開槽、模切等功能。電腦操控部采用多組通訊式電腦調整，主機電腦采用大屏PLC統一控制系統，可單獨控制送紙部、印刷部、開槽部、模切部，印刷版輥安裝有掛板歸零裝置，并配有反正腳踏開關。

2.開槽部預壓雙壓線輪，該機開槽深度和360°相位為電腦電動，開槽刀盤和壓線輪預壓輪左右移動均為絲桿電動點動調整，并附有尺標讀數。開槽相位調整機構為行星齒輪結構，整機傳動軸接紙軸距最190mm可實現最小200mm紙板通過。

3.備注選裝：模切部可選裝免版模切。

1. The gear thickness of this machine is 50mm and is quenched and tempered with 40 chromium steel forged parts. After the gear is processed, the hardness can reach 45-48HRC after high-frequency quenching treatment. The entire machine is equipped with a vacuum adsorption assisted leading edge paper feeding system, which can complete the printing, slotting, die-cutting and other functions of corrugated cardboard in one go. The computer control department adopts multiple sets of communication computers for adjustment, and the host computer adopts a large screen PLC unified control system, which can independently control the paper feeding department, printing department, slotting department, and die-cutting department. The printing plate roller is equipped with a hanging plate reset device and is equipped with a reverse foot switch.

2. The slotting part is pre pressed with double creasing wire wheels. The depth and 360 ° phase of the machine's slotting are computer-driven, and the left and right movements of the slotting cutter head and pressure wire wheel pre creasing wheels are adjusted by electric inching of the screw rod, with a ruler reading attached. The slotting phase adjustment mechanism adopts a planetary gear structure, and the transmission shaft of the entire machine can pass through a minimum of 200mm cardboard with a maximum distance of 190mm.

3. Remarks optional: The die-cutting section can be equipped with a slotting rings.